Atlantis Land A02-RA2 ME01 用户手册
AtlantisLand I-Storm Lan Router ADSL
16
2. Encapsulation: 1483 Bridged IP LLC
3. Bridged: Disabled
4. NAT Configuration: Dynamic NAPT
Please see scenario 2: Router Mode Configuration with Dynamic IP in Appendix for more detail
configuration.
configuration.
8.2 Static IP for WAN IP (RFC 1483 ROUTED)
Following settings are necessary when working under this mode:
1. VPI/VCI
2. Static IP Address: provided by ISP
3. Subnet Mask: provided by ISP
4. Default Gateway: provided by ISP
5. Encapsulation: 1483 Bridged IP LLC or 1483 Routed IP LLC (provided by ISP)
6. Bridged: Disabled
7. NAT Configuration: Dynamic NAPT
8. Preferred DNS server: IP is Provided by ISP
Please see scenario 3: Router Mode Configuration with Static IP in Appendix for more detail
configuration.
configuration.
8.3 PPPoA ( RFC 2364)
PPP is a widely used protocol for controlling a point-to-point link. It is used by existing ISPs (Internet
Service Providers) in providing dial-in services for the Internet. It can be used over a variety of
physical media to transport IP data, MAC data, and many other data types. Components of PPP have
been defined which provide option negotiation, compression, encryption, authentication and multi-link
facilities. For xDSL deployment, authentication is probably the single most important of these.
Following settings are necessary when working under this mode:
Service Providers) in providing dial-in services for the Internet. It can be used over a variety of
physical media to transport IP data, MAC data, and many other data types. Components of PPP have
been defined which provide option negotiation, compression, encryption, authentication and multi-link
facilities. For xDSL deployment, authentication is probably the single most important of these.
Following settings are necessary when working under this mode:
1. VPI/VCI
2. Encapsulation: PPPoA VC-Mux
3. Bridged: Disabled
4. PPP User Name: Provided by ISP
5. PPP password: Provided by ISP
6. NAT Configuration: Dynamic NAPT
Please see scenario 4: Router Mode Configuration PPPoA in Appendix for more detail configuration.
8.4 PPPoE ( RFC 2516)
Following settings are necessary when working under this mode:
1. VPI/VCI
2. Encapsulation: PPPoE LLC