Atlantis Land A02-RA2 ME01 用户手册
19
the LAN client and the WAN host will indicate their MSS during the TCP connection
handshake. The default value is 1432.
handshake. The default value is 1432.
• Automatic Reconnect: When it is checked, it will maintain the PPP connection all the time. If
the ISP shut down the PPP connection, it will automatically reconnect PPP session.
• Authentication: When AUTO option is chosen, the PAP mode will run first then CHAP.
• PPP Configuration Status will be displayed at the bottom of this page to show all the Session
Names with its Adapter (PVC number), Mode (PPPoA or PPPoE), Service Name, Account to
Use (PPP Account ID), Disconnect Timeout configuration, MRU, MTU, MSS, Authentication
Mode (Auto, CHAP or PAP), and Auto Reconnect configuration.
Use (PPP Account ID), Disconnect Timeout configuration, MRU, MTU, MSS, Authentication
Mode (Auto, CHAP or PAP), and Auto Reconnect configuration.
NAT Configuration
The NAT Configuration page allows the user to set the configuration for the Network Address
Translation. The default setting is Dynamic NAPT. It provides dynamic Network Address Translation
capability between LAN and multiple WAN connections, and the LAN traffic is routed to appropriate
WAN connections based on the destination IP addresses and Route Table. This eliminates the need for
the static NAT session configuration between multiple LAN clients and multiple WAN connections.
Translation. The default setting is Dynamic NAPT. It provides dynamic Network Address Translation
capability between LAN and multiple WAN connections, and the LAN traffic is routed to appropriate
WAN connections based on the destination IP addresses and Route Table. This eliminates the need for
the static NAT session configuration between multiple LAN clients and multiple WAN connections.
When the Dynamic NAPT is chosen, there is no need to configure the NAT Session and NAT
Session Name Configuration.
Session Name Configuration.
• NAT (Static): The NAT option only maps single WAN IP address to the local PC IP address.
It is peer-to-peer mapping. (1x1) For each WAN interface, only one local PC IP address can
be associated with each WAN interface. Click the link Session Name Configuration to add the
session name for WAN interface.
be associated with each WAN interface. Click the link Session Name Configuration to add the
session name for WAN interface.
Session Name: This field allows the user to enter his/her own session Name to
distinguish different NAT session for different interfaces among different PPP
sessions and different PVCs.
distinguish different NAT session for different interfaces among different PPP
sessions and different PVCs.