Atlantis Land A02-RA2 ME01 用户手册
AtlantisLand I-Storm Lan Router ADSL
30
For the PPP connect on WAN access, the PPP will be automatically reconnected when an
URL is entered in the browser (packet interested in going out the WAN). For the Automatic
Reconnect, it will reconnect the PPP session whenever it is terminated by ISP.
PPP Half Bridge: When the PPP Half Bridge is enabled, only one PC is able to access the
Internet, and the DHCP server will duplicate the WAN IP address from the ISP to the local
client PC. Only the PC with the WAN IP address can access the Internet.
URL is entered in the browser (packet interested in going out the WAN). For the Automatic
Reconnect, it will reconnect the PPP session whenever it is terminated by ISP.
PPP Half Bridge: When the PPP Half Bridge is enabled, only one PC is able to access the
Internet, and the DHCP server will duplicate the WAN IP address from the ISP to the local
client PC. Only the PC with the WAN IP address can access the Internet.
Reset to Factory Default
The Reset to Factory Default page allows users to reset the modem to original factory default
configuration (factory.reg).
configuration (factory.reg).
Diagnostic Test
The Diagnostic Test page shows the test results for the connectivity of the physical layer and
protocol layer for both LAN and WAN sides.
Testing Ethernet LAN Connection: This test checks the Ethernet LAN interface connection.
Testing ADSL Synchronization: This test checks the ADSL showtime. If this test returns
FAIL, all other tests will be skipped.
Test ATM OAM Segment Loop Back: This test sends ATM OAM F5 Segment loop back
request cells to the CO. This test will pass if response cell is received. Since some service
providers might not support this test, it could still work even if this test fails. If this test fails
consistently and the ADSL modem seems not working, make sure the VPI and VCI are
configured correctly.
Test ATM OAM End-to-End Loop Back: This test sends ATM OAM F5 End to End loop
back request cells to the CO. This test will pass if response cell is received. Since some r
service providers might not support this test, it could still work even if this test fails. If this
test return FAIL consistently and the ADSL modem seems not working, make sure the VPI
and VCI are configured correctly.
Test Ethernet Connect to ATM: This test checks the ATM AAL5 module is loaded correctly.
Test PPPoE Connection: This test checks the PPPOE connection.
Test PPP Layer Connection: This test checks the PPP authentication.
Test IP Connect to PPP: This test checks a valid IP address assigned from the service
provider.
Ping Primary DNS: This test checks the primary DNS can be reached through ping request.
Query DNS for www.conexant.com: This test checks the host name can be resolved to IP
address though domain name servers.
Ping www.conexant.com: This test checks the specified host can be reached through ping
request.
protocol layer for both LAN and WAN sides.
Testing Ethernet LAN Connection: This test checks the Ethernet LAN interface connection.
Testing ADSL Synchronization: This test checks the ADSL showtime. If this test returns
FAIL, all other tests will be skipped.
Test ATM OAM Segment Loop Back: This test sends ATM OAM F5 Segment loop back
request cells to the CO. This test will pass if response cell is received. Since some service
providers might not support this test, it could still work even if this test fails. If this test fails
consistently and the ADSL modem seems not working, make sure the VPI and VCI are
configured correctly.
Test ATM OAM End-to-End Loop Back: This test sends ATM OAM F5 End to End loop
back request cells to the CO. This test will pass if response cell is received. Since some r
service providers might not support this test, it could still work even if this test fails. If this
test return FAIL consistently and the ADSL modem seems not working, make sure the VPI
and VCI are configured correctly.
Test Ethernet Connect to ATM: This test checks the ATM AAL5 module is loaded correctly.
Test PPPoE Connection: This test checks the PPPOE connection.
Test PPP Layer Connection: This test checks the PPP authentication.
Test IP Connect to PPP: This test checks a valid IP address assigned from the service
provider.
Ping Primary DNS: This test checks the primary DNS can be reached through ping request.
Query DNS for www.conexant.com: This test checks the host name can be resolved to IP
address though domain name servers.
Ping www.conexant.com: This test checks the specified host can be reached through ping
request.
Code Image Update
The Code Image Update page allows users to upgrade the image code locally.
Browse the location of file, firmware.dlf or boorom.dlf file, and click the Upload to start the
update.
update.
Q: If my firmware.dlf includes fewer html files, will it keep old files in the flash memory?
A: No, when next time power up, the boot code will erase all files in flash and extract the new
files from the firmware.dlf into flash memory.
files from the firmware.dlf into flash memory.