Barco 26-1302001-00 用户手册
MatrixPRO-II DVI 16x16 Router
________________________________________________________________________
User’s Guide
Rev. 01
37
3.
Connect the Service Port located on the rear panel of the MATRIXPRO-II DVI 16x
16 to a RS-232 (Comm port) on a PC using the supplied download cable (RJ1
1 to D-Sub 9Pin cable).
16 to a RS-232 (Comm port) on a PC using the supplied download cable (RJ1
1 to D-Sub 9Pin cable).
4.
Select
②, ‘Comm port’ to select communication port of PC for RS-232
communication with MATRIXPRO-II DVI 16x16.
5.
To enable Comm port, Click ③ when it shown as ‘Serial Port Enable’.
6.
Power-On the MATRIXPRO-II DVI 16x16.
7.
The firmware upload should then begin and the status will be shown in the message
box as shown below.
box as shown below.
①
①
①
①
②
②
②
②
③
③
③
③