ZyXEL Communications P-660RU-Tx 用户手册
Chapter 25 Troubleshooting
P-660RU-Tx User’s Guide
164
3
Inspect your cables for damage. Contact the vendor to replace any damaged
cables.
cables.
4
Turn the P-660RU-Tx off and on.
5
If the problem continues, contact the vendor.
25.2 P-660RU-Tx Access and Login
I forgot the IP address for the P-660RU-Tx.
1
The default IP address is 192.168.1.1.
2
If you changed the IP address and have forgotten it, you might get the IP address
of the P-660RU-Tx by looking up the IP address of the default gateway for your
computer. To do this in most Windows computers, click Start > Run, enter cmd,
and then enter ipconfig. The IP address of the Default Gateway might be the IP
address of the P-660RU-Tx (it depends on the network), so enter this IP address
in your Internet browser.
of the P-660RU-Tx by looking up the IP address of the default gateway for your
computer. To do this in most Windows computers, click Start > Run, enter cmd,
and then enter ipconfig. The IP address of the Default Gateway might be the IP
address of the P-660RU-Tx (it depends on the network), so enter this IP address
in your Internet browser.
3
If this does not work, you have to reset the device to its factory defaults. See
.
I forgot the password.
1
The default password is 1234.
2
If this does not work, you have to reset the device to its factory defaults. See
.
I cannot see or access the Login screen in the web configurator.
1
Make sure you are using the correct IP address.
• The default IP address is
192.168.1.1
.
• If you changed the IP address (
), use the new IP
address.