ZyXEL Communications nbg-418n 用户手册
NBG-418N User’s Guide
137
C
H A P T E R
1 8
Sys OP Mode
18.1 Overview
The Sys OP Mode (System Operation Mode) function lets you configure select the device operation
mode: Router, Access Point, Client Bridge or Universal Repeater.
mode: Router, Access Point, Client Bridge or Universal Repeater.
See
for more information on which mode to choose.
18.2 General Screen
Use this screen to select how you connect to the Internet.
Figure 103
Maintenance > Sys OP Mode > General
The following table describes the labels in the General screen.
Table 58
Maintenance > Sys Op Mode > General
LABEL
DESCRIPTION
System Operation Mode
Router
Use this mode if you want to use routing functions such as LAN DHCP, NAT, firewall and
so on on the NBG-418N (N). The NBG-418N has separate LAN and WAN network IP
addresses.
so on on the NBG-418N (N). The NBG-418N has separate LAN and WAN network IP
addresses.
Access Point
Use this mode if you already have a Router (R) in your network and you want to bridge
all wired and wireless network connections.
all wired and wireless network connections.