ZyXEL Communications nbg-418n 用户手册
Chapter 4 Modes
NBG-418N User’s Guide
44
4.3 Setting your NBG-418N to AP Mode
1
Connect your computer to the LAN port of the NBG-418N.
2
The default LAN IP address of the NBG-418N is 192.168.1.1 in router mode (192.168.1.2 by default
in non-router mode). In router mode, the NBG-418N can assign your computer an IP address, so
you must set your computer to get an IP address automatically (computer factory default) or give it
a fixed IP address in the range between 192.168.1.3 and 192.168.1.254.
in non-router mode). In router mode, the NBG-418N can assign your computer an IP address, so
you must set your computer to get an IP address automatically (computer factory default) or give it
a fixed IP address in the range between 192.168.1.3 and 192.168.1.254.
3
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type the IP address of the NBG-418N as the web address in your web browser.
type the IP address of the NBG-418N as the web address in your web browser.
4
Log into the Web Configurator. See the
for instructions on how to do this.
5
Go to Maintenance > Sys OP Mode > General and select Access Point.
NAT
General
Use this screen to enable NAT.
Application
Use this screen to configure
servers behind the NBG-418N.
DDNS
General
Use this screen to configure Dynamic DNS, a service that allows you to
map a fixed domain name to a non-fixed IP address.
map a fixed domain name to a non-fixed IP address.
Security
Firewall
General
Use this screen to activate/deactivate the firewall.
Services
Use this screen to enable or disable ICMP and VPN passthrough features.
Management
Remote
MGMT
WWW
Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the NBG-418N.
address(es) users can use HTTP to manage the NBG-418N.
UPnP
General
Use this screen to enable UPnP on the NBG-418N.
Maintenance
System
General
Use this screen to view and change administrative settings such as system
and domain names, password and inactivity timer.
and domain names, password and inactivity timer.
Time Setting
Use this screen to change your NBG-418N’s time and date.
Logs
View Log
Use this screen to view the logs for the categories that you selected.
Tools
Firmware
Use this screen to upload firmware to your NBG-418N.
Configuration
Use this screen to backup and restore the configuration or reset the factory
defaults to your NBG-418N.
defaults to your NBG-418N.
Restart
This screen allows you to reboot the NBG-418N without turning the power
off.
off.
Sys OP
Mode
General
This screen allows you to select the device operation mode.
Language
Language
This screen allows you to select the language you prefer.
Table 18
Menus: Router Mode (continued)
LINK
TAB
FUNCTION