ZyXEL Communications nbg-418n 用户手册
Chapter 4 Modes
NBG-418N User’s Guide
49
Note: Wait while the NBG-418N restarts, then log in to the Web Configurator again.
4.4.1 Status Screen (Universal Repeater Mode)
Click on Status. The screen below shows the status screen in Universal Repeater Mode.
Figure 34
Status Screen (Universal Repeater Mode)
The following table describes the labels shown in the Status screen.
Table 21
Status Screen (Universal Repeater Mode)
LABEL
DESCRIPTION
Device Information
System Name
This is the System Name you enter in the Maintenance > System >
General screen. It is for identification purposes.
General screen. It is for identification purposes.
Firmware Version
This is the current firmware version of the NBG-418N.
LAN Information
- MAC Address
This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address
This shows the LAN port’s IP address.
- IP Subnet Mask
This shows the LAN port’s subnet mask.
- DHCP
This shows the LAN port’s DHCP role.