ZyXEL Communications NBG318S Series 用户手册
ENGLISH
3
1 Set Up Your Hardware
Do the following to make hardware connections for initial setup.
1 WAN: Connect the WAN port on your NBG318S to the Ethernet port on the device with
which you are accessing the Internet (for example, a router or modem) using an
Ethernet cable.
Ethernet cable.
2 LAN: Connect the Ethernet port on your computer to a LAN port on the NBG318S using
the Ethernet cable from the package.
3 POWER: Use the power cord from the package to connect the POWER socket to an
appropriate power source. This is also your HomePlug AV connection.
The LEDs (lights)
Look at the lights. When you connect the power, the power ( ) light blinks and stays on
once the device is ready. The LAN (
once the device is ready. The LAN (
) lights turn on if the LAN connections are
properly made.
V
Check your connections if the power
( )
or LAN
(
)
light does not turn
on. If this doesn’t help, disconnect the NBG318S from its power source, wait
for a few seconds and turn it back on.
for a few seconds and turn it back on.
1
2
3
Internet