ZyXEL Communications P-793H 用户手册
Chapter 30 Filter Configuration
P-793H User’s Guide
304
30.3 Example Filter
Let’s look at an example to block outside users from accessing the ZyXEL Device via telnet.
Please see our included disk for more example filters.
Please see our included disk for more example filters.
Figure 194 Telnet Filter Example
1 Enter 21 from the main menu to open Menu 21 - Filter and Firewall Setup.
2 Enter 1 to open Menu 21.1 - Filter Set Configuration.
3 Enter the index of the filter set you wish to configure (say 3) and press [ENTER]
2 Enter 1 to open Menu 21.1 - Filter Set Configuration.
3 Enter the index of the filter set you wish to configure (say 3) and press [ENTER]
.
4 Enter a descriptive name or comment in the Edit Comments field and press [ENTER].
5 Press [ENTER] at the message [Press ENTER to confirm] to open Menu 21.1.3 - Filter
5 Press [ENTER] at the message [Press ENTER to confirm] to open Menu 21.1.3 - Filter
Rules Summary.
6 Enter 1 to configure the first filter rule (the only filter rule of this set). Make the entries
in this menu as shown in the following figure.
Action
Matched
Select the action for a packet matching the rule.
Options are Check Next Rule, Forward and Drop.
Options are Check Next Rule, Forward and Drop.
Action Not
Matched
Select the action for a packet not matching the rule.
Options are Check Next Rule, Forward and Drop.
Options are Check Next Rule, Forward and Drop.
Once you have completed filling in Menu 21.1.1.1 - Generic Filter Rule, press [ENTER] at the
message “Press ENTER to Confirm” to save your configuration, or press [ESC] to cancel. This data will
now be displayed on Menu 21.1.1 - Filter Rules Summary.
Table 117 Menu 21.1.1.1: Generic Filter Rule (continued)
FIELD
DESCRIPTION