ZyXEL Communications NBG-418N v2 用户手册
Chapter 3 Connection Wizard
NBG-418N v2 User’s Guide
27
Note: The wireless stations and NBG-418N v2 must use the same SSID, channel ID,
WPA-PSK (if WPA-PSK is enabled) or WPA2-PSK (if WPA2-PSK is enabled) for
wireless communication.
3.4 Connection Wizard: STEP 3: Internet Configuration
Click Apply to finish setting up your NBG-418N v2 to operate on your network and access the
Internet.This wizard screen varies according to the connection type that you select.
Internet.This wizard screen varies according to the connection type that you select.
Figure 14
Wizard Step 3: Internet Configuration.
3.5 Connection Wizard Complete
Click Finish to complete the wizard setup.
WPA2-PSK AES
Choose WPA2-PSK AES security to configure a Pre-Shared Key. Choose this option only if
your wireless clients support WPA2-PSK. You will need to enter a Pre-Shared Key in the box
below.
your wireless clients support WPA2-PSK. You will need to enter a Pre-Shared Key in the box
below.
Pre-Shared Key
Type in a string of ASCII characters between 8 and 63 or hexadecimal characters between 8
and 64 for the Pre-Shared Key field.
and 64 for the Pre-Shared Key field.
Back
Click Back to display the previous screen.
Next
Click Next to proceed to the next screen.
Exit
Click Exit to close the wizard screen without saving.
Table 6
Wizard Step 2: Wireless LAN (continued)
LABEL
DESCRIPTION