ZyXEL Communications NBG-418N v2 用户手册
Chapter 4 Modes
NBG-418N v2 User’s Guide
37
2
The default LAN IP address of the NBG-418N v2 is 192.168.1.1 in router mode (192.168.1.2 by
default in non-router mode). In router mode, the NBG-418N v2 can assign your computer an IP
address, so you must set your computer to get an IP address automatically (computer factory
default) or give it a fixed IP address in the range between 192.168.1.3 and 192.168.1.254.
default in non-router mode). In router mode, the NBG-418N v2 can assign your computer an IP
address, so you must set your computer to get an IP address automatically (computer factory
default) or give it a fixed IP address in the range between 192.168.1.3 and 192.168.1.254.
3
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type the IP address of the NBG-418N v2 as the web address in your web browser.
type the IP address of the NBG-418N v2 as the web address in your web browser.
4
Log into the Web Configurator. See the
for instructions on how to do this.
5
Go to Maintenance > Sys OP Mode > General and select Access Point.
Figure 24
Maintenance > Sys OP Mode > AP
6
A pop-up window appears providing information on this mode. Click OK in the pop-up message
window. Click Apply. Your NBG-418N v2 is now in AP Mode.
window. Click Apply. Your NBG-418N v2 is now in AP Mode.
Note: Wait while the NBG-418N v2 restarts, then log in to the Web Configurator again.
4.3.1 Status Screen (AP Mode)
Click on Status. The screen below shows the status screen in AP Mode.
Figure 25
Status Screen (AP Mode)