ZyXEL Communications NBG-419N 用户手册
Chapter 12 Wireless LAN
NBG-419N v2 User’s Guide
113
12.9 WPS Station Screen
Use this screen when you want to add a wireless station using WPS. To open this screen, click
Network > Wireless LAN > WPS Station tab.
Network > Wireless LAN > WPS Station tab.
Note: Note: After you click Push Button on this screen, you have to press a similar
button in the wireless station utility within 2 minutes. To add the second wireless
station, you have to press these buttons on both device and the wireless station
again after the first 2 minutes.
Figure 81
Network > Wireless LAN > WPS Station
The following table describes the labels in this screen.
Table 50
Network > Wireless LAN > WPS Station
LABEL
DESCRIPTION
Push Button
Use this button when you use the PBC (Push Button Configuration) method to configure
wireless stations’s wireless settings. See
wireless stations’s wireless settings. See
Click this to start WPS-aware wireless station scanning and the wireless security information
synchronization.
synchronization.
Or input
station’s PIN
number
station’s PIN
number
Use this button when you use the PIN Configuration method to configure wireless station’s
wireless settings. See
wireless settings. See
.
Type the same PIN number generated in the wireless station’s utility. Then click Start to
associate to each other and perform the wireless security information synchronization.
associate to each other and perform the wireless security information synchronization.