ZyXEL Communications NBG-419N 用户手册
Chapter 22 Bandwidth Management
NBG-419N v2 User’s Guide
165
The following table describes the labels in this screen.
22.5.2 Rule Configuration: User Defined Service Rule Configuration
If you want to edit a bandwidth management rule for other applications or services, click the Edit
icon in the User-defined Service table of the Advanced screen. The following screen displays.
icon in the User-defined Service table of the Advanced screen. The following screen displays.
Figure 115
Bandwidth Management Rule Configuration: User-defined Service
The following table describes the labels in this screen
Table 74
Bandwidth Management Rule Configuration: Application List
LABEL
DESCRIPTION
#
This is the number of an individual bandwidth management rule.
Enable
Select an interface’s check box to enable bandwidth management on that interface.
Direction
These read-only labels represent the physical interfaces. Bandwidth management applies to
all traffic flowing out of the router through the interface, regardless of the traffic’s source.
Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the Router and be
managed by bandwidth management.
all traffic flowing out of the router through the interface, regardless of the traffic’s source.
Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the Router and be
managed by bandwidth management.
Bandwidth
Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum or
minimum bandwidth allowed for the rule in kilobits per second.
minimum bandwidth allowed for the rule in kilobits per second.
Destination Port This is the port number of the destination that define the traffic type, for example TCP port
80 defines web traffic.
See
See
for some common services and port numbers.
Source Port
This is the port number of the source that define the traffic type, for example TCP port 80
defines web traffic.
See
defines web traffic.
See
for some common services and port numbers.
Protocol
This is the protocol (TCP, UDP or user-defined) used for the service.
Apply
Click Apply to save your customized settings.
Cancel
Click Cancel to exit this screen without saving.