ZyXEL Communications NBG-419N 用户手册

Chapter 1 Getting to Know Your Router

NBG-419N v2 User’s Guide

Your Router supports WiFi Protected Setup (WPS), which is an easy way to set up a secure wireless 
network. WPS is an industry standard specification, defined by the WiFi Alliance.

WPS allows you to quickly set up a wireless network with strong security, without having to 
configure security settings manually. Each WPS connection works between two devices. Both 
devices must support WPS (check each device’s documentation to make sure). 

Depending on the devices you have, you can either press a button (on the device itself, or in its 
configuration utility) or enter a PIN (a unique Personal Identification Number that allows one device 
to authenticate the other) in each of the two devices. When WPS is activated on a device, it has two 
minutes to find another device that also has WPS activated. Then, the two devices connect and set 
up a secure network by themselves.

For more information on using WPS, see 

You may need screw anchors if mounting on a concrete or brick wall.

Select a position free of obstructions on a wall strong enough to hold the weight of the 
device. 

Mark two holes on the wall at the appropriate distance apart for the screws.

USB

Green

On

The Router has a USB device installed.

Blinking

The Router is transmitting and/or receiving data from routers 
through an installed USB device.

Off

There is no USB device connected to the Router.

Front Panel LEDs and WPS Button (continued)

Table 2   Wall Mounting Information

Distance between holes

11 cm

M4 Screws

Two

Screw anchors (optional)

Two