ZyXEL Communications NBG-419N 用户手册

 Chapter 2 ZyXEL NetUSB Share Center Utility

NBG-419N v2 User’s Guide

This section describes the utility’s configuration window, which allows you to set certain options for 
the utility. These options do not apply to the USB devices connected to the Router. 

You can open it by clicking the Tools > Configuration menu command.

ZyXEL NetUSB Share Center Utility Configuration Window

Auto-Connect 
Printer

Set Auto-Connect Printer

You can set the selected printer to ‘auto-connect’ 
after you have connected it to your computer during 
inital connection. If the printer is auto-connected to 
your computer, they will always be connected over 
the network. You do not need to configure it manually 
each time.

Click this to show your installed printer list and select 
the one you want to set as auto-connected. 

Note: If the computer is connecting to the shared USB 

printer for the first time, you need to click 
Connect and setup the printer before you can 
use the Auto-Connect Printer function. See 

 for more details. 

Note: You first must install the appropriate drivers for 

the printer that you intend to use.

Delete Auto-Connect Printer

This removes the auto-connect option from the 
selected printer.

ZyXEL NetUSB Share Center Utility Main Screen Menus (continued)