ZyXEL Communications NBG-419N 用户手册
Chapter 4 Introducing the Web Configurator
NBG-419N v2 User’s Guide
41
4.3 Resetting the Router
If you forget your password or IP address, or you cannot access the Web Configurator, you will need
to use the RESET button at the back of the Router to reload the factory-default configuration file.
This means that you will lose all configurations that you had previously saved, the password will be
reset to “1234” and the IP address will be reset to “192.168.1.1”.
to use the RESET button at the back of the Router to reload the factory-default configuration file.
This means that you will lose all configurations that you had previously saved, the password will be
reset to “1234” and the IP address will be reset to “192.168.1.1”.
4.3.1 Procedure to Use the Reset Button
1
Make sure the power LED is on.
2
Press the RESET button for longer than 1 second to restart/reboot the Router.
3
Press the RESET button for longer than five seconds to set the Router back to its factory-default
configurations.
configurations.