ZyXEL Communications NBG-419N 用户手册
Chapter 10 WISP Mode
NBG-419N v2 User’s Guide
85
10.5.4 Site Survey Screen
Use this screen to scan for and connect to a wireless network automatically. Go to Configuration >
Site Survey to open the following screen.
Site Survey to open the following screen.
Figure 62
Configuration > Wireless LAN > Site Survey (WISP)
The following table describes the labels in this screen.
Table 40
Configuration > Wireless LAN > Site Survey (WISP)
LABEL
DESCRIPTION
Station Site Survey
#
Select a wireless device and click Add Profile to open a configuration screen where you
can add the selected wireless device to a profile and then enable it.
can add the selected wireless device to a profile and then enable it.
SSID
This displays the SSID of the wireless device.
indicates the wireless device is added to an activated profile and the Router is
connecting to it.
connecting to it.
BSSID
This displays the MAC address of the wireless device.
Signal Strength
This displays the strength of the wireless signal. The signal strength mainly depends on the
antenna output power and the distance between your Router and this device.
antenna output power and the distance between your Router and this device.
Channel
This displays the channel number used by this wireless device.
station encryp
This displays the data encryption method used by this wireless device.
station auth
This displays the authentication method used by this wireless device.
Network Type
This displays the network type (In (Infrastructure) or Ad (Ad Hoc) of this wireless device.
Rescan
Click this button to search for available wireless devices within transmission range and
update this table.
update this table.
Setting
Select a wireless device and click this button to add it to a profile.