ZyXEL Communications NBG4115 用户手册

 Chapter 4 Connection Wizard

User’s Guide

Note: The wireless stations and NBG4115 must use the same SSID, channel ID, 

WPA-PSK (if WPA-PSK is enabled) or WPA2-PSK (if WPA2-PSK is enabled) for 
wireless communication.

Choose Extend (WPA-PSK) or Extend (WPA2-PSK) security in the Wireless 
LAN setup screen to set up a Pre-Shared Key.

Figure 14   Wizard Step 2: Extend (WPA-PSK or WPA2-PSK) Security

The following table describes the labels in this screen. 

The NBG4115 offers four Internet connection types. They are Ethernet, PPP 
over Ethernet, PPTP or Mobile 3G. The wizard attempts to detect which WAN 
connection type you are using. If the wizard does not detect a connection type, 
you must select one from the drop-down list box. 

If you have an always-on connection, most likely you should use Ethernet. If your 
connection requires a user name and password to authenticate your connection, 
then choose either PPPoE or PPTP. Finally, if you are using a USB-based 3G 
device, select the Mobile 3G option.

Table 10   Wizard Step 2: Extend (WPA-PSK or WPA2-PSK) Security

Pre-Shared 
Key

Type from 8 to 63 case-sensitive ASCII or HEX characters. You can set up 
the most secure wireless connection by configuring WPA in the wireless 
LAN screens. You need to configure an authentication server to do this.

Back

Click Back to display the previous screen.

Next

Click Next to proceed to the next screen. 

Exit

Click Exit to close the wizard screen without saving.