ZyXEL Communications G-3000H 用户手册
G-3000H User’s Guide
Chapter 17 LAN Setup
187
Figure 116 Menu 3.5.6 - SSID Profile Edit
The following table describes the fields in this menu.
17.3.4 Configuring Bridge Link
Follow the steps below to configure bridge link on your ZyAIR.
1 From the main menu, enter 3 to open Menu 3 – LAN Setup.
2 Enter 5 to display Menu 3.5 – Wireless LAN Setup.
Menu 3.5.6 - SSID Profile Edit
1 SSID03 5 SSID01
Active= Yes Active= No
Active= Yes Active= No
2 SSID01 6 SSID01
Active= No Active= No
Active= No Active= No
3 SSID01 7 SSID01
Active= No Active= No
Active= No Active= No
4 SSID01 8 SSID01
Active= No Active= No
Active= No Active= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Table 67 Menu 3.5.6 - SSID Profile Edit
FIELD
DESCRIPTION
SSID 1~8
Press [SPACE BAR] to select an SSID from 1 to 16. The SSID (Service Set
IDentity) identifies the Service Set with which a wireless station is associated.
Wireless stations associating to the access point (AP) must have the same
SSID.
Active
Press [SPACE BAR] to select Yes or No and press [ENTER].
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.