ZyXEL Communications 681 用户手册

To transfer the firmware, follow the procedure below:

Launch the FTP client on your workstation.

Type open and the IP address of your Prestige.

Type root and your SMT password as requested.

Type put RouterConfiguration rom-0 where “RouterConfiguration” is the name of
your firmware upgrade file on your workstation and “rom-0” is the remote file name on the
Prestige.

The system reboots automatically after a successful firmware upload

.

In addition to the direct console port connection, the Prestige supports the up/downloading of the firmware
and the configuration file using TFTP (Trivial File Transfer Protocol) over LAN. Although TFTP should
work over WAN as well, it is not recommended.

To use TFTP, your workstation must have both telnet and TFTP clients. To transfer the firmware and the
configuration file, follow the next procedure:

Menu 24.7.2 - System Maintenance - Upload Router Configuration File

          To upload router configuration file:
          1. Enter "y" at the prompt below to go into debug mode.
          2. Enter "atlc" after "Enter Debug Mode" message.
          3. Wait for "Starting XMODEM upload" message before activating
             Xmodem upload on your terminal.
          4. After successful firmware upload, enter "atgo" to restart the
             router.

          Warning:
          1. Proceeding with the upload will erase the current router
             configuration file.
          2. The router's console port speed (Menu 24.2.2) may change when
             it is restarted; Please adjust your terminal's speed accordingly. The

password (menu 23) may change also.

       3. When uploading the DEFAULT configuration file, the console port speed

will be reset to 9600 bps and the password to "1234".

Do You Which To Proceed:(Y/N)