ZyXEL Communications GS-1524 用户手册
Chapter 18 SNMP
GS-1524/GS-1548 User’s Guide
109
The following table describes the labels in this screen.
18.2.2 SNMP Group: Modify
Click on the Group ID number or select a Group ID from the Group ID drop down list box
in the SNMP Group screen to modify the settings of an existing group.
in the SNMP Group screen to modify the settings of an existing group.
Figure 63 SNMP Group: Modify
The following table describes the labels in this screen.
Table 42 SNMP Group: Create
LABEL
DESCRIPTION
Group Name
Specify the name for this SNMP group. You can use 1-33 printable characters.
Spaces are allowed.
SNMP Version
Specify the SNMP version this group uses to manage the Switch.
Authentication
This field is only editable if you select SNMPv3 in the SNMP Version field. Select
Enabled to force SNMP v3 groups to authenticate with the Switch or select
Disabled to deactivate authentication for the SNMP v3 groups. For SNMP v1 and
SNMP v2c authentication is always disabled.
Access
Read - select Enabled to allow this group to collect information from this Switch.
Write - select Enabled to allow this group to create or edit MIBs.
Write - select Enabled to allow this group to create or edit MIBs.
Create
Click this to add this SNMP group to the Switch.
Note: A maximum of ten groups can be created on the Switch.
Cancel
Click this to go back to the main SNMP Group screen without saving your changes.
Table 43 SNMP Group: Modify
LABEL
DESCRIPTION
Group ID
This field indicates which group you are modifying.
Click on Remove This Group to delete this group configuration from the Switch.
Click on Display All Group to view the main SNMP Group screen.
Click on Remove This Group to delete this group configuration from the Switch.
Click on Display All Group to view the main SNMP Group screen.
Group Name
Edit the name for this SNMP group.
SNMP Version
Specify the SNMP version this group uses to manage the Switch.
Authentication
This field is only editable if you select SNMPv3 in the SNMP Version field. Select
Enabled to force SNMP v3 groups to authenticate with the Switch or select
Disabled to deactivate authentication for the SNMP v3 groups. For SNMP v1 and
SNMP v2c authentication is always disabled.