ZyXEL Communications VSG-1200 V2 用户手册
VSG-1200 V2 User’s Guide
219
Chapter 32 Using The SMT
The follow table describes the fields in this menu.
32.6.2 WAN Type: PPPoE
To activate PPPoE support on the VSG, enter P in the WAN Type field to display the WAN
Configuration screen as shown next. Refer to the related web configurator section for
background information.
Configuration screen as shown next. Refer to the related web configurator section for
background information.
Figure 167 SMT: WAN Configuration: PPPoE
Table 74 SMT: WAN Configuration: Static or Dynamic IP Address
FIELD
DESCRIPTION
WAN Type? (D/S/
P/T)
Enter D (Dynamic) to set the VSG to dynamically obtain an IP address and other
network information (IP address, DNS information etc.) from a DHCP server on the
WAN network. This is the default setting.
Enter S (Static) to set the VSG to use a static (or fixed) IP address. Then set the
Enter S (Static) to set the VSG to use a static (or fixed) IP address. Then set the
following fields.
IP Address
This field is available when you select S in the WAN Mode field.
Enter the static IP address assigned to you by your ISP or network administrator.
Enter the static IP address assigned to you by your ISP or network administrator.
Subnet Mask
This field is available when you select D in the WAN Mode field.
Enter the subnet mask depending on your network needs. The default is
Enter the subnet mask depending on your network needs. The default is
255.255.255.0. Refer to
if you are implementing
subnetting.
Default Gateway
Enter the IP address of the default gateway.
Primary/
Secondary DNS IP
Address
Enter the IP address of the DNS server(s) in the Primary DNS IP Address and/or
Secondary DNS IP Address fields.
The default primary DNS server IP address is 168.95.1.1.
You must specify a DNS server if you set the VSG to use a static WAN IP address.
The default primary DNS server IP address is 168.95.1.1.
You must specify a DNS server if you set the VSG to use a static WAN IP address.
At the “S)ave and return R)eturn without saving M)odify:” prompt, type S and press [ENTER] to save the
changes and return to the previous screen, type R and press [ENTER] to discard all changes and return
to the previous screen or type M and press [ENTER] to continue configuring the fields. Restart the
device when prompted
Press [ESC] and enter Y to stop any actions in the current screen and return to the previous screen. All
Press [ESC] and enter Y to stop any actions in the current screen and return to the previous screen. All
changes will be discarded.
WAN Configuration
WAN Type? (D/S/P/T) :P
Username :
Password :
Connect Setting? (C/K) :C
Max idle Time(Min) :10
Optional Setting
Service name :
PPP MTU Setting :1492
TCP MSS setting :1452
WAN Type? (D/S/P/T) :P
Username :
Password :
Connect Setting? (C/K) :C
Max idle Time(Min) :10
Optional Setting
Service name :
PPP MTU Setting :1492
TCP MSS setting :1452