ZyXEL Communications ZyWALL 300 用户手册
Chapter 16 Virtual Servers
ZyWALL USG 300 User’s Guide
258
16.4.1 Virtual Server Add/Edit
The Virtual Server Add/Edit screen lets you create new virtual servers and edit existing
ones. To open this window, open the Virtual Server summary screen. (See
ones. To open this window, open the Virtual Server summary screen. (See
.) Then, click on an Add icon or Edit icon to open the following screen.
"
If the virtual server will send traffic to the clients, you need to create a
corresponding policy route. This is called NAT 1:1.
corresponding policy route. This is called NAT 1:1.
See
for an example of NAT 1:1.
Figure 167 Network > Virtual Server > Edit
The following table describes the labels in this screen.
Table 80 Network > Virtual Server > Edit
LABEL
DESCRIPTION
Enable
Use this option to turn the virtual server on or off.
Name
Type in the name of the virtual server. The name is used to refer to the virtual
server. You may use 1-31 alphanumeric characters, underscores(
server. You may use 1-31 alphanumeric characters, underscores(
_
), or dashes (-),
but the first character cannot be a number. This value is case-sensitive.
Interface
Select the interface on which packets for the virtual server must be received.
Original IP
Use the drop-down list box to indicate which destination IP address this virtual
server supports. Choices are:
Any - this virtual server supports the IP address of the selected interface.
User Defined - this virtual server supports a specific IP address, specified in the
User Defined field.
HOST address - the drop-down box lists all the HOST address objects in the
ZyWALL. If you select one of them, this virtual server supports the IP address
specified by the address object.
Select Create Object to configure a new IP address object.
server supports. Choices are:
Any - this virtual server supports the IP address of the selected interface.
User Defined - this virtual server supports a specific IP address, specified in the
User Defined field.
HOST address - the drop-down box lists all the HOST address objects in the
ZyWALL. If you select one of them, this virtual server supports the IP address
specified by the address object.
Select Create Object to configure a new IP address object.