ZyXEL Communications P-2608HWL-Dx Series 用户手册

P-2608HWL-Dx Series User’s Guide

296

Chapter 23 Remote Management Configuration

The following table describes the labels in this screen.

You can configure your ZyXEL Device for remote Telnet access as shown next. The 
administrator uses Telnet from a computer on a remote network to access the ZyXEL Device.

Table 115   Remote Management: WWW

WWW

Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Access Status

Select the interface(s) through which a computer may access the ZyXEL Device 

using this service.

Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the 

ZyXEL Device using this service. 
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the ZyXEL Device using this service.

HTTPS

Server Host Key

Select the certificate that the ZyXEL Device will use to identify itself. The ZyXEL 

Device is the SSL server and must always authenticate itself to the SSL client (the 

computer which requests the HTTPS connection with the ZyXEL Device).  

Authenticate 

Client Certificates

Select Authenticate Client Certificates (optional) to require the SSL client to 

authenticate itself to the ZyXEL Device by sending the ZyXEL Device a certificate. 

To do that the SSL client must have a CA-signed certificate from a CA that has 

been imported as a trusted CA on the ZyXEL Device (see 

on importing certificates for details).

Port

The HTTPS proxy server listens on port 443 by default. If you change the HTTPS 

proxy server port to a different number on the ZyXEL Device, for example 8443, 

then you must notify people who need to access the ZyXEL Device web 

configurator to use “https://ZyXEL Device IP Address:8443” as the URL.

Access Status

Select a ZyXEL Device interface from Access Status on which incoming HTTPS 

access is allowed.
You can allow only secure web configurator access by setting the WWW  Access 

Status field to Disable and setting the HTTPS Access Status field to an 

interface(s).

Secure Client IP 

A secure client is a “trusted” computer that is allowed to communicate with the 

ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the ZyXEL Device using this service.

Apply

Click Apply to save your settings back to the ZyXEL Device. 

Cancel

Click Cancel to begin configuring this screen afresh.