ZyXEL Communications P-2608HWL-Dx Series 用户手册

下载
页码 451
P-2608HWL-Dx Series User’s Guide
48
Chapter 2 Introducing the Web Configurator
2.1.2  The RESET Button
You can use the RESET button on the side of the device to reboot the device. If you forget 
your password or cannot access the web configurator, you will need to use the RESET button 
to reload the factory-default configuration file. This means that you will lose all configurations 
that you had previously and the password will be reset to “1234”. 
2.1.2.1  Using The Reset Button
Make sure the POWER light is on (not blinking).
Do one of the following.
To set the device back to the factory default settings, press the RESET button for ten 
seconds or until the POWER light begins to blink. When the POWER light begins to 
blink, the defaults have been restored and the device restarts.
You can also use the reset button to activate OTIST by pressing the RESET button for 5 
seconds. See 
 for more information on OTIST.
2.2  Web Configurator Main Screen
Figure 8   Main Screen
As illustrated above, the main screen is divided into these parts:
• A - title bar
A
B
C
D