ZyXEL Communications MES3500-24F 用户手册

Chapter 9 VLAN

MES3500-24/24F User’s Guide

Use this screen to configure and view 802.1Q VLAN parameters for the Switch. See 

 for more information on static VLAN. To configure a static VLAN, click Static VLAN in the 

VLAN Status screen to display the screen as shown next. 

Advanced Application > VLAN > Static VLAN  

The following table describes the related labels in this screen.   

Advanced Application > VLAN > Static VLAN 

ACTIVE

Select this check box to activate the VLAN settings.  

Name

Enter a descriptive name for the VLAN group for identification purposes. This name consists 
of up to 64 printable characters; spaces are allowed.

VLAN Group ID

Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.

Port 

The port number identifies the port you are configuring. 

*

Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all ports. Use this row first 
to set the common settings and then make adjustments on a port-by-port basis. 

Note: Changes in this row are copied to all the ports as soon as you make them.

Control

Select Normal for the port to dynamically join this VLAN group using GVRP. This is the 
default selection.

Select Fixed for the port to be a permanent member of this VLAN group.

Select Forbidden if you want to prohibit the port from joining this VLAN group.