ZyXEL Communications MES3500-24F 用户手册

Chapter 9 VLAN

MES3500-24/24F User’s Guide

Click Protocol Based VLAN in the VLAN Port Setting screen to display the configuration screen 
as shown. 

Advanced Application > VLAN > VLAN Port Setting > Protocol Based VLAN 

The following table describes the labels in this screen. 

Advanced Application > VLAN > VLAN Port Setting > Protocol Based VLAN Setup 

Active

Check this box to activate this protocol based VLAN.

Port

Type a port number to be included in this protocol based VLAN.

This port must belong to a static VLAN in order to participate in a protocol based 
VLAN. See 

 for more details on setting up VLANs.

Name

Enter up to 32 alphanumeric characters to identify this protocol based VLAN.

Ethernet-type

Use the drop down list box to select a predefined protocol to be included in this 
protocol based VLAN or select Others and type the protocol number in hexadecimal 
notation. For example, the IP protocol in hexadecimal notation is 0800, and Novell 
IPX protocol is 8137.

Note: Protocols in the hexadecimal number range of 0x0000 to 0x05ff are not allowed 

to be used for protocol based VLANs.

VID

Enter the ID of a VLAN to which the port belongs. This must be an existing VLAN 
which you defined in the Advanced Applications > VLAN screens.

Priority

Select the priority level that the Switch will assign to frames belonging to this VLAN.

Add

Click Add to save your changes to the Switch’s run-time memory. The Switch loses 
these changes if it is turned off or loses power, so use the Save link on the top 
navigation panel to save your changes to the non-volatile memory when you are 
done configuring.

Cancel

Click Cancel to begin configuring this screen afresh.