ZyXEL Communications MES3500-24F 用户手册
Chapter 37 Maintenance
MES3500-24/24F User’s Guide
285
1
In the Maintenance screen, click the Config 1 button next to Reboot System to reboot and load
configuration one. The following screen displays.
configuration one. The following screen displays.
Figure 168
Reboot System: Confirmation
2
Click OK again and then wait for the Switch to restart. This takes up to two minutes. This does not
affect the Switch’s configuration.
affect the Switch’s configuration.
Click Config 2 and follow steps 1 to 2 to reboot and load configuration two on the Switch.
37.5 Firmware Upgrade
Make sure you have downloaded (and unzipped) the correct model firmware and version to your
computer before uploading to the device.
computer before uploading to the device.
Firmware is uploaded to the current image. See
for more information
about images and uploading firmware to a different image.
Be sure to upload the correct model firmware as uploading the wrong
model firmware may damage your device.
model firmware may damage your device.
Click Management > Maintenance > Firmware Upgrade to view the screen as shown next.
Figure 169
Management > Maintenance > Firmware Upgrade
Type the path and file name of the firmware file you wish to upload to the Switch in the File Path
text box or click Browse to locate it. Select the Rebooting check box if you want to reboot the
Switch and apply the new firmware immediately. (Firmware upgrades are only applied after a
reboot). Click Upgrade to load the new firmware.
text box or click Browse to locate it. Select the Rebooting check box if you want to reboot the
Switch and apply the new firmware immediately. (Firmware upgrades are only applied after a
reboot). Click Upgrade to load the new firmware.
After the firmware upgrade process is complete, see the System Info screen to verify your current
firmware version number.
firmware version number.