ZyXEL Communications MES3500-24F 用户手册
Chapter 41 Cluster Management
MES3500-24/24F User’s Guide
320
41.3 Clustering Management Configuration
Use this screen to configure clustering management. Click Management > Cluster Management
> Configuration to display the next screen.
> Configuration to display the next screen.
Figure 197
Management > Cluster Management > Configuration
The following table describes the labels in this screen.
Table 138
Management > Cluster Management > Configuration
LABEL
DESCRIPTION
Clustering
Manager
Manager
Active
Select Active to have this Switch become the cluster manager switch. A cluster can only have
one manager. Other (directly connected) switches that are set to be cluster managers will not
be visible in the Clustering Candidates list. If a switch that was previously a cluster member
is later set to become a cluster manager, then its Status is displayed as Error in the Cluster
Management Status screen and a warning icon (
one manager. Other (directly connected) switches that are set to be cluster managers will not
be visible in the Clustering Candidates list. If a switch that was previously a cluster member
is later set to become a cluster manager, then its Status is displayed as Error in the Cluster
Management Status screen and a warning icon (
) appears in the member summary list
below.
Name
Type a name to identify the Clustering Manager. You may use up to 32 printable characters
(spaces are allowed).
(spaces are allowed).