ZyXEL Communications P-6600HW-Tx v3 用户手册
Chapter 9 Wireless LAN
P-660HW-Tx v3 User’s Guide
131
See the rest of this chapter for information on the other labels in this screen.
9.3.1 No Security
Select No Security to allow wireless clients to communicate with the access points without
any data encryption.
any data encryption.
"
If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.
is accessible to any wireless networking device that is within range.
Network Name
(SSID)
(Service Set IDentity) The SSID identifies the Service Set with which a wireless client
is associated. Wireless clients associating to the access point (AP) must have the
same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for
the wireless LAN.
Note: If you are configuring the ZyXEL Device from a computer
connected to the wireless LAN and you change the ZyXEL
Device’s SSID or WEP settings, you will lose your wireless
connection when you press Apply to confirm. You must then
change the wireless settings of your computer to match the
ZyXEL Device’s new settings.
Device’s SSID or WEP settings, you will lose your wireless
connection when you press Apply to confirm. You must then
change the wireless settings of your computer to match the
ZyXEL Device’s new settings.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
Security Mode
See the following sections for more details about this feature.
MAC Filter
The MAC filter allows you to configure the ZyXEL Device to give exclusive access to
up to 32 devices (Allow) or exclude up to 32 devices from accessing the ZyXEL
Device (Deny). Every Ethernet device has a unique MAC (Media Access Control)
address. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the
MAC address of the devices to configure this screen.
Click the Edit icon to configure the MAC filter. See
Click the Edit icon to configure the MAC filter. See
for
more details.
Apply
Click Apply to save your changes to the ZyXEL Device.
Cancel
Click Cancel to reload the previous configuration for this screen.
Advanced
Setup
Click Advanced Setup to display the Wireless Advanced Setup screen and edit
more details of your WLAN setup. See
for more details.
Table 45 Wireless LAN: General
LABEL
DESCRIPTION