ZyXEL Communications 202H 用户手册

Prestige 202H User’s Guide 

System Information and Diagnosis 

 

20-3 

Own CLID  Shows your Caller ID. 

Peer IP Address  This refers to the IP address of the peer. 

Peer CLID  This shows the Caller ID of the peer. 

Ethernet 

This shows statistics for the LAN. 

Status  This displays the port speed and duplex setting. 

TxPkts  This is the number of transmitted packets to the LAN. 

RxPkts  This is the number of received packets from the LAN. 

Collision  This is the number of collisions. 

Total Outcall Time 

This shows the total outgoing call time for both B1 and B2 channels since the 
system has been powered up. 

CPU Load 

This specifies the percentage of CPU utilization. 

LAN Packet Which 
Triggered Last Call 

This shows the first 48 octets of the LAN packet that triggered the last outgoing 
call. 

Commands 

Drop B1  This command drops the B1 channel.  

Drop B2  This command drops the B2 channel. 

Reset Counters  This command resets all counters. 

Drop All  This command drops all channels.  

This section describes your system and allows you to choose different console port speeds. To get to the 
System Information and Console Port Speed: 

Enter 24 to go to Menu 24 – System Maintenance.  

Enter 2 to open Menu 24.2 – System Information and Console Port Speed.  

From this menu you have two choices as shown in the next figure: