ZyXEL Communications 100-NH 用户手册
Chapter 10 Maintenance
NWA1000 Series User’s Guide
110
10.3 What You Need To Know
You can find the firmware for your device at www.zyxel.com. It is a file that uses the system project
code with a "*.bin" extension, for example "V100AAEO0.bin". The upload process uses HTTP
(Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the
system will reboot.
code with a "*.bin" extension, for example "V100AAEO0.bin". The upload process uses HTTP
(Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the
system will reboot.
10.4 General Screen
Use the General screen to identify your NWA over the network. Click Maintenance > General.
The following screen displays.
The following screen displays.
Figure 57
Maintenance > General
The following table describes the labels in this screen.
Table 34
Maintenance > General
LABEL
DESCRIPTION
System Settings
System Name
Type a descriptive name to identify the NWA in the Ethernet network.
This name can be up to 15 alphanumeric characters long. Spaces are not allowed, but
dashes "-" are accepted.
dashes "-" are accepted.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to reload the previous configuration for this screen.