ZyXEL Communications 200 Series 用户手册

 Chapter 36 Addresses

ZyWALL USG 100/200 Series User’s Guide

The following table describes the labels in this screen. 

The Address Group screen provides a summary of all address groups. To access this screen, 
click Object > Address > Address Group. 

Figure 452   Object > Address > Address Group

Table 201   Object > Address > Address > Edit

Name

Type the name used to refer to the address. You may use 1-31 alphanumeric 
characters, underscores(

_

), or dashes (-), but the first character cannot be a 

number. This value is case-sensitive.

Address Type

Select the type of address you want to create. Choices are: HOST, RANGE, 
SUBNET, INTERFACE IP, INTERFACE SUBNET, and INTERFACE GATEWAY.

Note: The ZyWALL automatically updates address objects that are 

based on an interface’s IP address, subnet, or gateway if the 
interface’s IP address settings change. For example, if you 
change LAN1’s IP address, the ZyWALL automatically 
updates the corresponding interface-based, LAN1 subnet 
address object.

IP Address

This field is only available if the Address Type is HOST. This field cannot be blank. 
Enter the IP address that this address object represents.

Starting IP 
Address

This field is only available if the Address Type is RANGE. This field cannot be 
blank. Enter the beginning of the range of IP addresses that this address object 
represents.

Ending IP 
Address

This field is only available if the Address Type is RANGE. This field cannot be 
blank. Enter the end of the range of IP address that this address object represents.

Network

This field is only available if the Address Type is SUBNET, in which case this field 
cannot be blank. Enter the IP address of the network that this address object 
represents.

Netmask

This field is only available if the Address Type is SUBNET, in which case this field 
cannot be blank. Enter the subnet mask of the network that this address object 
represents. Use dotted decimal format.

Interface

If you selected INTERFACE IP, INTERFACE SUBNET, or INTERFACE 
GATEWAY as the Address Type, use this field to select the interface of the 
network that this address object represents.

OK

Click OK to

 

save your changes back to the ZyWALL.

Cancel

Click Cancel to exit this screen without saving your changes.