Draytek 2800 Series 用户指南
Vigor2800 Series User’s Guide
71
Enable
Check to enable RADIUS client feature
Server IP Address
Enter the IP address of RADIUS server
Destination Port
The UDP port number that the RADIUS server is using. The
default value is 1812 , based on RFC 2138.
default value is 1812 , based on RFC 2138.
Shared Secret
The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides must
be configured to use the same shared secret.
authenticate the messages sent between them. Both sides must
be configured to use the same shared secret.
Re-type Shared Secret
Re-type the Shared Secret for confirmation.