Draytek Vigor2910 用户手册

 

Vigor2910 Series User’s Guide 

114

SIP PING interval 

The default value is 150sec. It is useful for a Nortel server 
NAT Traversal Support. 

Show the status for the corresponding SIP account. R means 
such account is registered on SIP server successfully. – means 
the account is failed to register on SIP server. 

 

Assign a name for this profile for identifying. You can type 
similar name with the domain. For example, if the domain 
name is draytel.org, then you might set draytel-1 in this field. 

If you want to make VoIP call without register personal 
information, please choose None and check the box to achieve 
the goal. Some SIP server allows user to use VoIP function 
without registering. For such server, please check the box of 
make call without register. Choosing Auto is recommended. 
The system will select a proper way for your VoIP call. 

 

Set the port number for sending/receiving SIP message for 
building a session. The default value is 5060. Your peer must 
set the same value in his/her Registrar. 

Set the domain name or IP address of the SIP Registrar server. 

Set domain name or IP address of SIP proxy server. By the 
time you can type:port number after the domain name to 
specify that port as the destination of data transmission (e.g., 
nat.draytel.org:5065) 

Check this box to make the proxy acting as outbound proxy.