Sanyo Micro Hi-fi System - 10 Watts DC-DA1160 DCDA1160 用户手册
产品代码
DCDA1160
-6-
Recording copyright material without permission of the copyright owners
is usually an infringement. If you wish to re-record copyright material,
permission from the copyright owner is necessary. SANYO does not ap-
prove of, and cannot be held responsible for, any unlawful use of this
machine.
is usually an infringement. If you wish to re-record copyright material,
permission from the copyright owner is necessary. SANYO does not ap-
prove of, and cannot be held responsible for, any unlawful use of this
machine.
Recording compact discs
1.
Load a blank cassette.
2.
Select “cd” function.
3.
Load the disc to be recorded and press the i button to begin CD
play.
-
play.
-
Select the track number if required.
-
For programmed recording, programme the material in advance
(as described under “PROGRAMMED PLAY”).
(as described under “PROGRAMMED PLAY”).
4.
Press the REC button. The PLAY button is engaged simultaneously
and CD recording starts.
and CD recording starts.
5.
Press the STOP/EJECT button to stop recording.
When the end of the tape is reached, the cassette deck stop auto-
matically.
When the end of the tape is reached, the cassette deck stop auto-
matically.
-
The CD player and the cassette deck can’t run synchronous record-
ing, or stop at the same time automatically also.
ing, or stop at the same time automatically also.
Recording from the tuner
1.
Load a blank cassette.
2.
Tune in the radio station to be recorded.
3.
Press the REC button to start recording.
4.
Press the STOP/EJECT button to stop recording.
When beat is heard (Main unit only)
Beat (a high-pitched noise) may sometimes be heard during the record-
ing of radio broadcasts. If this occurs, set the BEAT
Beat (a high-pitched noise) may sometimes be heard during the record-
ing of radio broadcasts. If this occurs, set the BEAT
CUT switch (rear of
the unit) to location “1” or “2” to select the setting that gives the best result.
Safeguards against accidental erasure
Accidental erasure can be prevented by breaking out the tabs on the end
of the cassette tape (where the tape is not exposed) using a screwdriver
or similar implement.
If a tab is broken out in error and you wish to re-record the tape, simply
block the tab hole using adhesive tape and the tape can be used for re-
cording again.
of the cassette tape (where the tape is not exposed) using a screwdriver
or similar implement.
If a tab is broken out in error and you wish to re-record the tape, simply
block the tab hole using adhesive tape and the tape can be used for re-
cording again.
RECORDING
A
B
Side B
Side A
Break out tab A for side A.
Break out tab B for side B.
Break out tab B for side B.
To preset stations
Up to 12 stations can be preset totally.
1.
Tune in the stations to be preset as described above.
2.
Press the MEMORY button on the
main unit.
main unit.
3.
While “MEMORY” is blinking, press
the PRESET button (or the TU PRE-
SET button on the remote control)
to select the channel to be preset.
the PRESET button (or the TU PRE-
SET button on the remote control)
to select the channel to be preset.
4.
While “MEMORY” is blinking, press the MEMORY button. “MEMORY”
remains.
-
remains.
-
In this example, “103.25 MHz” FM station is preset on channel 9.
5.
Repeat steps above to add more preset stations,
-
-
When presetting a new station, the previous preset station is
cleared.
cleared.
MEMORY
REPEAT
MHz
kHz
BASS
PM
AM
AM
FM
SLEEP
ST
MEMORY
REPEAT
MHz
kHz
BASS
PM
AM
AM
FM
SLEEP
ST
Note: “MEMORY” keeps on blinking without stopping or disappearing if
you have any interruption in setting operation process, just waiting for
your next setting operation step.
you have any interruption in setting operation process, just waiting for
your next setting operation step.
Listening to preset stations
Press the PRESET button (or TU PRESET button on the remote control)
to select the desired channel number.
to select the desired channel number.
To receive FM stereo broadcasts (Using the remote con-
trol)
trol)
“
” appears when an FM stereo broadcast is received in stereo mode.
-
If the signal from an FM stereo station is weak and reception is poor,
press the FM MODE/REPEAT button to change to the mono mode.
The reception may be improved, but the sound will be monaural.
press the FM MODE/REPEAT button to change to the mono mode.
The reception may be improved, but the sound will be monaural.
-
After that, press either button on the main unit (MEMORY, STOP/n,
PRESET, f, e) or on the remote control (n, TU PRESET, f,
e), “
PRESET, f, e) or on the remote control (n, TU PRESET, f,
e), “
” appears again, the main unit turn into stereo mode again.
The sleep timer automatically switches off the power after a preset time
has elapsed. There are 9 time periods available: 10, 20, 30, 40, 50, 60,
70, 80, and 90 minutes. Press the SLEEP button repeatedly to select a
time period.
has elapsed. There are 9 time periods available: 10, 20, 30, 40, 50, 60,
70, 80, and 90 minutes. Press the SLEEP button repeatedly to select a
time period.
Example: Select the sleep time of 60 minutes.
Press the SLEEP button to choose sleep time of 60 minutes, “SLEEP”
and “SLP 60” appear, after several seconds it will return to the original
display and “SLEEP” remains display till power off.
Press the SLEEP button to choose sleep time of 60 minutes, “SLEEP”
and “SLP 60” appear, after several seconds it will return to the original
display and “SLEEP” remains display till power off.
SLEEPING TIMER OPERATION
(REMOTE CONTROL ONLY)
MEMORY
REPEAT
MHz
kHz
BASS
PM
AM
FM
AM
FM
SLEEP
ST
MEMORY
REPEAT
MHz
kHz
BASS
PM
AM
AM
FM
SLEEP
ST
-
To release the sleep timer, press the SLEEP button repeatedly to se-
lect “SLP 00”, the “SLEEP” logo disappears.
lect “SLP 00”, the “SLEEP” logo disappears.
-
The sleep timer will clear automatically when power off.
1160UK(En)P1-10
03/31/2005, 10:35 AM
6