Black Box LWE100A-KIT 用户手册
724-746-5500 | blackbox.com
Page 24
724-746-5500 | blackbox.com
Chapter 4: Basic Settings
WARNING: Bridge mode and AP Repeater mode are similar to AP mode when the device is set to Router mode; the WAN is on
wired port and the LAN is on wireless port. Users must also connect the extender with another wireless device before
it is set to Router mode and access the extender via the connected wireless device.
it is set to Router mode and access the extender via the connected wireless device.
4.5 Time Settings
Compliant with NTP, the Wireless P-T-P Ethernet Extender keeps time to match the Internet time. Configure the time in “Time
Settings” from “System.” To use this feature, check “Enable NTP Client Update” in advance.
Settings” from “System.” To use this feature, check “Enable NTP Client Update” in advance.
Figure 4-6. Time settings.
Current Time: Display the present time in Yr, Mon, Day, Hr, Min, and Sec.
Time Zone Select: Select the time zone from the dropdown list.
NTP Server: Select the time server from the “NTP Server” dropdown list or manually input the IP address of an available time
server into “Manual IP.” Click on “Apply” to save the settings.
server into “Manual IP.” Click on “Apply” to save the settings.
4.6 RADIUS Settings
RADIUS (Remote Authentication Dial-In User Service) is a server for remote user authentication and accounting; it plays a central
role in the network because it provides authenticating, authorizing, accounting, auditing, alarming, etc. It enables an organization
to maintain user profiles in a central database that all remote servers can share.
role in the network because it provides authenticating, authorizing, accounting, auditing, alarming, etc. It enables an organization
to maintain user profiles in a central database that all remote servers can share.
Open “RADIUS Settings” in “System” to make RADIUS configuration.