Black Box LWE100A-KIT 用户手册
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 31
Chapter 4: Basic Settings
4.9 Site Survey
Under wireless client mode, the Wireless P-T-P Ethernet Extender is able to perform a site survey. It detects available information
about the access points.
about the access points.
Open “Basic Settings” in “Wireless,” by clicking the “Site Survey” button beside the “Wireless Mode” option. The wireless site
survey window will pop up with a list of available APs in the vicinity. Select the AP you want to connect to and click “Selected” to
establish connection.
survey window will pop up with a list of available APs in the vicinity. Select the AP you want to connect to and click “Selected” to
establish connection.
Figure 4-15. Site Survey.
4.10 VAP Profile Settings
Available in AP mode, the Wireless P-T-P Ethernet Extender allows up to 16 virtual SSIDs on a single BSSID and to configure
different profile settings such as security and VLAN ID to each SSID. To create a virtual AP, check the “Enable” box of the profile
and click on the profile (for example, Profile 2) to configure wireless and security settings. Click on the “Apply” button to activate
the profile.
different profile settings such as security and VLAN ID to each SSID. To create a virtual AP, check the “Enable” box of the profile
and click on the profile (for example, Profile 2) to configure wireless and security settings. Click on the “Apply” button to activate
the profile.