Black Box LWE100A-KIT 用户手册
724-746-5500 | blackbox.com
Page 44
724-746-5500 | blackbox.com
Chapter 6: Management
Restore factory default settings via the “Reset” button: If software in the Wireless P-T-P Ethernet Extender unexpectedly crashes
and you can no longer reset the unit via Web, you may do hardware reset via the reset button. Press and hold the button for at
least five seconds and then release it until the PWR LED blinks.
and you can no longer reset the unit via Web, you may do hardware reset via the reset button. Press and hold the button for at
least five seconds and then release it until the PWR LED blinks.
6.7 Reboot
You can reboot your Wireless P-T-P Ethernet Extender from “Configuration File” in “Management.”
Click “Reboot” and press “Yes” when prompted to start the reboot process. This takes a few minutes.
Figure 6-8. Reboot.
6.8 Password
From “Password Settings” in “Management,” you can change the password to manage your IEEE 802.11b/g/n Wireless CPE.
Enter the new password in both the “New Password” and “Confirm Password” fields; click “Apply” to save the settings.
Figure 6-9. Password.
The password is case-sensitive and it cannot be longer than 19 characters.