Black Box LWE100A-KIT 用户手册
724-746-5500 | blackbox.com
Page 48
724-746-5500 | blackbox.com
Chapter 7: Monitoring Tools
7.4 Data Rate Test
The Data Rate Test enables you to test the current RSSI at each data rate between your Wireless P-T-P Ethernet Extenders.
Figure 7-4. Data rate test.
7.5 Antenna Alignment
In Bridge mode, when the bridges are not easily visible from the location where the dish will be installed, the antenna alignment
tool can help you evaluate the position of the unit and adjust the angle of the antenna more precisely. Keep in mind that in real
circumstances a lot of additional factors should be taken into account when your unit is installed. These factors include various
obstacles (buildings, trees), the landscape, the altitude, transponder orientation, polarization, etc.
tool can help you evaluate the position of the unit and adjust the angle of the antenna more precisely. Keep in mind that in real
circumstances a lot of additional factors should be taken into account when your unit is installed. These factors include various
obstacles (buildings, trees), the landscape, the altitude, transponder orientation, polarization, etc.
To use the tool, select the desired remote WDS bridge and click “Start.” The Web page will display the measured signal strength,
RSSI, and transmit/receive packets. If the signal quality is not good, adjust the antenna and see if the quality improves.
RSSI, and transmit/receive packets. If the signal quality is not good, adjust the antenna and see if the quality improves.