Canon WUX500 用户手册

16

Pay attention to the following points regarding installation and handling of the projector.

• If the projector will not be used for a long period of time, be sure to remove 

the power plug from the power outlet to ensure safety. Failure to do so 
presents a risk of fire if dust accumulates on the plug or outlet.

• Parts of the cabinet around and above the exhaust vents may become hot 

during projection. Touching these areas during operation could cause burns 
to the hands. Pay particular attention in preventing young children from 
touching these parts. Additionally, do not place any metal objects around or 
above the exhaust vents. Due to the heat from the projector, doing so could 
cause an accident or personal injury.

• Do not place the projector where it may be exposed to oily smoke or steam, 

such as near kitchen counters or humidifiers. Doing so may cause fire or 
electric shock.

• Do not place any heavy objects on top of the projector or sit / stand on it. Pay 

particular attention to prevent small children from doing so. The projector 
may be knocked over and this could result in damage or a personal injury.

• Do not place the projector on an unstable or slanted surface. Doing so may 

cause the projector to fall or be knocked over and could result in a personal 
injury.

• Do not place any objects in front of the lens during projection. Doing so could 

cause a fire.

• Presenters in front of the projector should stand where the light does not 

seem too bright, and where their shadow does not fall on the screen.

When handling the lamp, pay attention to the following points.

• Be sure not to handle the lamp immediately after it has been used. Be sure 

to switch off the power and wait for approximately 1 hour for the lamp and 
the projector to cool down sufficiently. Failure to do so could result in a burn 
or personal injury due to heat from the lamp or projector.