Runco VX-6000D 用户手册
Runco VX-6000d Owner’s Operating Manual
7
PRE
L
IMINAR
Y
2.2
VX-6000d Rear Panel
VX-6000d Rear Panel
Figure 2-2 shows the VX-6000d rear connector panel.
Figure 2-2. VX-6000d Rear Panel
1.
POWER INPUT (100 to 240 VAC)
Connect the VX-6000d to power here.
2.
HDMI INPUT
An HDCP-compliant, digital video input for connecting the HDMI output from the DHD
Controller.
Controller.
3.
BUILT-IN KEYPAD
Used to navigate the VX-6000d on-screen menus. Refer to VX-6000d Built-In
Keypad on page 18 for more information.
Keypad on page 18 for more information.
4.
12-VOLT (200 mA) TRIGGER OUTPUT (cylindrical, DC power supply-type jack)
Connection for a retractable screen, screen masking or other, 12-volt
trigger-activated equipment. Outputs +12 volts/200 mA when the projector is turned
on.
trigger-activated equipment. Outputs +12 volts/200 mA when the projector is turned
on.
5.
WIRED IR (3.5-mm, mini phono jack)
Not used. To use an external infrared receiver or wired remote control with this
projector, connect it to the IR input on the DHD Controller (see Figure 2-4).
projector, connect it to the IR input on the DHD Controller (see Figure 2-4).
6.
RS-232C INPUT (RJ-11 female connector)
Connect the RS-232 output from the DHD Controller here, using the provided
communication cable.
communication cable.
RS-232C
WIRED
IR
+12V
100-240V
AC INPUT
HDMI IN
1
2
3
4
5
6