Runco VX-6000D 用户手册
74
Runco VX-6000d Owner’s Operating Manual
PRE
L
IMINAR
Y
5.2
Lens Replacement
Lens Replacement
Figure 5-1 shows the VX-6000d lens assembly.
Figure 5-1. VX-6000d Lens Assembly Exploded View
1.
Remove the Projector Front Jewelry by
loosening the captive #2 Phillips screw
below the lens.
loosening the captive #2 Phillips screw
below the lens.
Only trained, authorized Runco dealers should attempt to
remove or replace a lens. Please read this procedure
carefully before doing so.
remove or replace a lens. Please read this procedure
carefully before doing so.
Lens replacement is normally performed at the Runco factory. Field
replacement of lenses is generally only required if the projector is
re-installed in a new location or the lens has been damaged.
replacement of lenses is generally only required if the projector is
re-installed in a new location or the lens has been damaged.
Front of Lens
Motor Assembly
Electrical Connector
and Harness
Electrical Connector
and Harness
Projector Front Jewelry
Motor Assembly
9/64” Hex Screw (6x)
for Mounting Lens
Note