Runco Vision 85 用户手册

Controls and Functions

Vidikron Vision 85 Owner’s Operating Manual

PRE

IMINAR

IR OUTPUT INDICATOR

Lights when a button is pressed to indicate that an IR signal is being transmitted.

LIGHT

Press to illuminate the buttons.

ON / OFF

Press to turn the projector on or off.

ENT (Enter)

Press to select a highlighted menu item or confirm a changed setting.

Cursor Buttons (

)

Use these buttons to select items or settings, adjust settings or switch display patterns.

When no menu is present on-screen, the UP and DOWN buttons toggle through the
available aspect ratios, in this order:

UP Button = 16:9 - Standard (4:3) - Letterbox - IntelliWide - Cinema - IntelliWide 2.35

DOWN Button = IntelliWide 2.35 - Cinema - IntelliWide - Letterbox - Standard (4:3) - 16:9

Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this
order:

LEFT Button = HDMI 2 - HDMI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video 2 -
S-Video 1 - Composite

RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB
2 - HDMI 1 - HDMI 2

RETURN/EXIT

Press this button to exit the current menu and return to the previous one, or to cancel an
operation.

MENU

Press this button to access the OSD controls.

On some remote control units, this button is where the RETURN/EXIT
button (item #6) appears here.

IntelliWide 2.35 is available only on the Vision 85/CineWide and only on
the analog inputs (HD/RGB, SD Component, Composite and S-Video). For
more information about aspect ratios, refer to Table 4-1.

The “direct select” function of the UP, DOWN, LEFT and RIGHT buttons is
available only on the analog inputs (HD/RGB, SD Component, Composite
and S-Video).

On some remote control units, the ENT (Enter) button (item #4) is in this
location.

Note