Runco VX-22D 用户手册
Runco VX-22d Owner’s Operating Manual
7
PRE
L
IMINAR
Y
8.
SOFT POWER BUTTON
Press once to turn on the VX-22d. Press it again to put the projector into Standby
mode. For a discrete on or off command, you can use the direct access buttons on
the remote control (see Figure 2-5).
mode. For a discrete on or off command, you can use the direct access buttons on
the remote control (see Figure 2-5).
9.
PATTERN BUTTON
Press PATTERN to access the internal test pattern menu. Use arrow keys to select a
pattern and press SELECT to confirm. Press PATTERN again to return to the
selected source.
pattern and press SELECT to confirm. Press PATTERN again to return to the
selected source.
10. POWER INPUT (100 to 240 VAC)
Connect the VX-22d to power here.
11. SERVICE PORT
For use by authorized service personnel only.
12. USB-B
High-speed service port (for future use).
13. DVI-DL (Dual-Link)
An HDCP-compliant, dual-link digital video input for connecting the output from the
DHD Controller.
DHD Controller.
14. SELECT BUTTON
Press SELECT to confirm your selection of a highlighted choice on the On-Screen
Display (OSD).
Display (OSD).
15. MENU BUTTON
Pressing the MENU button brings up the main VX-22d menu. Also, if you are in an
adjustment mode or function, pressing MENU brings the menu back one level.
adjustment mode or function, pressing MENU brings the menu back one level.