Benq MP611 用户手册

Operation

30

Hiding the image

In order to draw the audience’s full attention to the 
presenter, you can use BLANK to hide the screen 
image. Press any key on the control panel to restore 
the image. The word “BLANK” appears at the 
lower right corner of the screen while the image is 
hidden. When this function is activated with 
video/S-video signal connected, the audio can still 
be heard.

You can set the blank time in the 

 

Advanced > Blank Time 

to let the projector 

return the image automatically after a period of time when there is no action taken on the 
blank screen. Note that once BLANK is pressed, the projector enters Economic mode 
automatically.

Creating your own startup screen-MyScreen 
function

In addition to selecting the projector preset startup screen from among BenQ logo, Black or 
Blue screen, you can make your own startup screen by downloading pictures from your 
computer to the projector.

1.

Connect the projector to a desktop computer via RS232 cable (optional accessory). See 

2.

Before download starts, be sure the projector has entered Standby Mode. Follow the 
instruction below to enter Standby Mode:

i. Plug AC power, and POWER, TEMP and LAMP LEDs on the projector will flash 

orange and then go off at the same time.

ii. POWER LED then turns solid orange.

3.

Insert the bundled CD into the CD drive of your computer. Click Install MyScreen 
Wizard and follow the on-screen instructions to proceed.