Runco CL-610LT 用户手册
28
Runco CL-610 Owner’s Operating Manual
Basic Operation
Selecting an Aspect Ratio
Adjusting the Picture
ANA
16X9
VWIDE
LBOX
4X3
CINEMA
VCINE
2
1
Select an aspect ratio that suits the format of
the video signal. The following aspect ratios
are available.
the video signal. The following aspect ratios
are available.
•
CINEMA: The image in the Letterbox mode
is enlarged to a 16x9 image and the upper
and lower portions are compressed.
is enlarged to a 16x9 image and the upper
and lower portions are compressed.
•
ANA16X9 (Anamorphic): A 4:3 image is
stretched horizontally to fit a 16:9 screen.
This setting is for 16:9 DVDs and HDTV
programs.
stretched horizontally to fit a 16:9 screen.
This setting is for 16:9 DVDs and HDTV
programs.
•
4 X 3 (Standard 4:3): The input signal is
scaled to fit a 4:3 display mode in the center
of the screen.
scaled to fit a 4:3 display mode in the center
of the screen.
•
LBOX (Letterbox): An image in letterbox
format is enlarged to fit a 16:9 full screen
display; the upper and lower portions are
compressed.
format is enlarged to fit a 16:9 full screen
display; the upper and lower portions are
compressed.
•
VWIDE (Virtual Wide): This setting
transforms a 4x3 image to a 16x9 image.
transforms a 4x3 image to a 16x9 image.
•
VCINE (Virtual Cinema): A 2.35 image is
stretched vertically in both directions to fill
a 16:9 image.
stretched vertically in both directions to fill
a 16:9 image.
BRT
CONT
COL
TNT
• Press
BRT (Brightness) to adjust picture
brightness.
• Press
CONT (Contrast) to adjust picture
contrast.
• Press
COL (Color) to adjust color
intensity.
• Press
TNT (Tint) to adjust color tones.
Selecting Video Memory
MEM1
FACT
ISF
DAY
ISF
NIGHT
• Press
MEM1 to recall custom memory
settings.
• Press
ISF NIGHT to recall ISF Night
settings.
• Press
ISF DAY to recall ISF Day
settings.
NOTE: ISF settings must be calibrated
and stored by a certified ISF calibrator.
For more information, please go to
www.imagingscience.com.
and stored by a certified ISF calibrator.
For more information, please go to
www.imagingscience.com.
• Press
FACT (Factory) to restore factory
settings for the current source. An on-
screen confirmation message appears.
Press
screen confirmation message appears.
Press
FACT again to confirm.