Runco CL-610LT 用户手册
31
Runco CL-610 Owner’s Operating Manual
On-Screen Display Menus
Using the Menu
INFO
RVR
ENTER
EXIT
MENU
This unit is equipped with an on-screen
display (OSD) menu for making adjustments
and changing settings. There are five menu
languages; see the Language setting under
“Installation” on page 35.
display (OSD) menu for making adjustments
and changing settings. There are five menu
languages; see the Language setting under
“Installation” on page 35.
• Press the
Menu button to turn on/off the OSD menu.
NOTE: If the Main Menu is displayed, you can also press
Exit to turn it off.
• Use the arrow buttons (
▲,◄,▼,►) to select items in the menu or to make various
adjustments.
• Press
Enter or
► to select an item to change, or press Exit to leave and save the
setting of items in the menu.
Main Menu
When the
Menu button is pressed, the Main Menu (shown above) appears on the
screen. Use the
▲ or ▼ button to move to an item, then press Enter to select it.
The active source is indicated by an arrow (>) to the left of the source; in the example
above, Video is the active source. To select a different source, use the
above, Video is the active source. To select a different source, use the
▲ or ▼ button
to highlight it and press Enter or
►.
Runco CL-610
> Video
S-Video
Component1
Component2
RGB-HD
HDMI
------------------------
Aspect Ratio
Installation
Option
Set Up
ISF Calibration
Source selection and picture quality adjustments
Aspect Ratio selection
Option selection
Setup selection
ISF Calibration selection
Installation selection