Ricoh PJ WX4130 用户手册
• 3
• 4
• 4
Power Off on No Signal
Select the time from the final operation to automatic power shutdown when there are no input
signals.
Default: [Off]
signals.
Default: [Off]
• Off
• 5 min.
• 10 min.
• 20 min.
• 30 min.
• 5 min.
• 10 min.
• 20 min.
• 30 min.
Power On Method
Select whether or not to use the auto power on function.
Default: [Manual]
Default: [Manual]
• Manual
Turn the projector on when the [Power] button is pressed.
• Auto.
Automatically turn on the projector when the power cord is connected.
Standby Energy Saving
Select the level of energy savings while on standby.
You can save power by using this function. However, this function affects start-up time. Select a
mode according to how you use the projector.
Default: [High]
You can save power by using this function. However, this function affects start-up time. Select a
mode according to how you use the projector.
Default: [High]
• High
The energy saving level is high, but start-up time is slower.
• Low
The energy saving level is low, but start-up time is faster.
Lamp Power
Select the lamp power level.
Select [Eco] if the image is too bright or when projecting images in a dark room.
Default: [Stnd.]
Select [Eco] if the image is too bright or when projecting images in a dark room.
Default: [Stnd.]
• Eco
• Stnd.
• Stnd.
Default Settings Menu
61